Wireless model for high flexibility in installation with no wiring


This product addresses the following needs.


  • The need to integrate the monitoring of a large number of units.
  • The need to diagnose with no wiring.



Diagnostic method Vibration (overall value, frequency analysis)
Data management Cloud server
Measurement method Continuous monitoring


System configuration

  • Measurement data is transmitted via a mobile network. No troublesome cabling is required.
  • Our engineers analyze data in the cloud and provide reports.

  • ※1The rotation speed and load signals can also be measured.
  • ※2When the diagnostic software (sold separately) is installed, you can manage the measurements on your PC without accessing to the cloud server.



Early detection of abnormalities

Abnormalities can be detected before the failure by monitoring the trend of vibration values at characteristic frequencies through frequency analysis.


Collective monitoring of multiple units

1 gateway can connect 100 wireless sensors at maximum.


Wireless connection and battery-powered
・You can select either the 8-channel type or the 16-channel type according to the type of reducer and application.
・The standard range of communication is approximately 10 to 30 meters. (Varies depending on the surrounding environment.)
・If the gateway is far away, the sensors can relay the connection to increase the reach.
・4-year typical sensor battery lifetime.
(Varies depending on the sensor configuration and measurement interval.)



Proposals based on detailed analysis by our engineers

Our engineers will propose countermeasures based on precise analysis of the cloud data.